Tool · Service size calculator
Electric service size calculator
Quick answer
Enter your home's size, heating and cooling, and large appliances to estimate the calculated load in amps. Under about 170 A, a 200-amp service fits comfortably; between 170 and 200 A it is tight; above 200 A you need a 400-amp (Class 320) service. This is an estimate based on the NEC optional dwelling method, not a substitute for your electrician's load calculation.
How the calculator works
- General load: 3 VA per square foot, two 1,500 VA kitchen circuits, one 1,500 VA laundry circuit, plus nameplate ratings of fixed appliances and chargers.
- The first 10,000 VA counts at 100% and the rest at 40%, per the NEC optional method for dwellings (220.82; 120.82 in the 2026 NEC).
- Heating and cooling: 100% of the AC or heat pump compressor (estimated at 1,700 VA per ton), plus 65% of backup or central electric heat.
- Total VA divided by 240 V gives amps.
Nameplate values beat our estimates: if you know your equipment, ask your electrician to run the full calculation. Next: 200 amp vs. 400 amp service and the 7 steps to get electric service.